PUBLIC

DPOMultiVidC::DPOMultiVidC(const DListC &) DPOMultiVidC::DPOMultiVidC(const StringC &,const StringC &) DPOSPortC::operator =(const DPOSPortC &) DPOPortC::Body(void) DPOPortC::Body(void) const DPOPortC::Put(const DataT &) DPOPortC::PutArray(const SArray1dC &) DPOPortC::IsPutReady(void) const DPSeekCtrlC::Body(void) DPSeekCtrlC::Body(void) const DPSeekCtrlC::Seek(UIntT) DPSeekCtrlC::DSeek(IntT) DPSeekCtrlC::Tell(void) const DPSeekCtrlC::Size(void) const DPSeekCtrlC::Start(void) const DPOPortBaseC::Body(void) DPOPortBaseC::Body(void) const DPOPortBaseC::PutEOS(void) DPOPortBaseC::OutputType(void) const DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const DPPortC::Body(void) DPPortC::Body(void) const DPPortC::IsAsync(void) const DPPortC::ConnectedTo(void) const DPPortC::GetAttr(const StringC &,StringC &) DPPortC::GetAttr(const StringC &) DPPortC::SetAttr(const StringC &,const StringC &) RCHandleVC::Body(void) const RCHandleVC::Body(void) RCHandleVC::Save(ostream &) const RCHandleVC::Save(BinOStreamC &) const RCHandleVC::Abstract(void) RCHandleVC::operator >>(istream &,RCHandleVC &) RCHandleVC::operator >>(BinIStreamC &,RCHandleVC &) DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const RCHandleC::operator =(const RCHandleC &) RCHandleC::DeepCopy(UIntT) const RCHandleC::operator ==(const RCHandleC &) const RCHandleC::operator !=(const RCHandleC &) const RCHandleC::Hash(void) const RCHandleC::IsValid(void) const RCHandleC::Invalidate(void) RCHandleC::IsHandleType(const DT &) const RCHandleC::CheckHandleType(const DT &) const RCHandleC::Body(void) RCHandleC::Body(void) const RCHandleC::References(void) const RCHandleC::operator <<(ostream &,const RCHandleC &) RCHandleC::operator >>(istream &,RCHandleC &)

Saves sequences to a specified list of files, or files with names of the form basename.C.FFFFF.type
Where:
basename is a text id for the file
C is a 1 digit view number
FFFFF is a 5 digit frame number
type is the file type, such as "tif", "ppm", etc

To save a sequence to disk using this convention:

DPOSPortC< SArray1dC< ImageC > > port;
OpenOSequence(port, "@multiview:basename:type");

Sequences start at frame 0, view 0
If no type is specified, tif is assumed

Otherwise, use:

DPOSPortC< SArray1dC< ImageC > > port;
OpenOSequence(port, "@viewlist:seq1;seq2;...;seqN");

public DPOSPortC<SArray1dC<ImageC<PixelC>>>

DPOMultiVidC(const DListC<StringC> & view_list)

Construct from base filename and format.
Actual opening of streams is delayed until the first Put(...) operation.

DPOMultiVidC(const StringC & fnBase,const StringC & fnFormat)

Construct from base filename and format.
Actual opening of streams is delayed until the first Put(...) operation.

const DPOSPortC<SArray1dC<ImageC<PixelC>>> & operator =(const DPOSPortC<SArray1dC<ImageC<PixelC>>> & obj)

Assigment.

DPOPortBodyC<SArray1dC<ImageC<PixelC>>> & Body()

Access body.

const DPOPortBodyC<SArray1dC<ImageC<PixelC>>> & Body() const

Access body.

bool Put(const SArray1dC<ImageC<PixelC>> & dat)

Put data to stream
Returns true if data is put into stream succesfully.

IntT PutArray(const SArray1dC<SArray1dC<ImageC<PixelC>>> & data)

Put an array of data elements into a stream.
returns the number of elements processed from the array.

bool IsPutReady() const

Is port ready for data ?

DPSeekCtrlBodyC & Body()

Access body class.

const DPSeekCtrlBodyC & Body() const

Access body class.

bool Seek(UIntT off)

Seek to location in stream.
Returns false, if seek failed. (Maybe because its not implemented.) if an error occurered (Seek returned False) then stream position will not be changed.

bool DSeek(IntT off)

Delta Seek, goto location relative to the current one.
The default behavour of this functions is : Do some error checking then: Seek((UIntT)((IntT) Tell() + off)); if an error occurered (DSeek returned False) then stream position will not be changed.

UIntT Tell() const

Find current location in stream.
Defined as the index of the next object to be written or read. May return ((UIntT) (-1)) if not implemented.

UIntT Size() const

Find the total size of the stream. (assuming it starts from 0)
May return ((UIntT) (-1)) if not implemented.

UIntT Start() const

Find the offset where the stream begins, normally zero.
Defaults to 0

DPOPortBaseBodyC & Body()

Access body.

const DPOPortBaseBodyC & Body() const

Access body.

void PutEOS()

Put End Of Stream marker.

const type_info & OutputType() const

Get type of output port.

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

DPPortBodyC & Body()

Access body.

const DPPortBodyC & Body() const

Access body.

bool IsAsync() const

Does port work asynchronously ??

DPPortC ConnectedTo() const

Is this port connected to another ?
If not returns invalid handle.

bool GetAttr(const StringC & attrName,StringC & attrValue)

Get a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

StringC GetAttr(const StringC & attrName)

Get a stream attribute.
Return the value of an attribute or an empty string if its unkown. This is for handling stream attributes such as frame rate, and compression ratios.

bool SetAttr(const StringC & attrName,const StringC & attrValue)

Set a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

const DPEntityBodyC & Body() const

Constant access to body of object.

DPEntityBodyC & Body()

Constant access to body of object.

bool Save(ostream & out) const

Save to stream 'out'.

bool Save(BinOStreamC & out) const

Save to binary stream 'out'.

RCAbstractC Abstract()

Create an abstract handle.

istream & operator >>(istream & strm,RCHandleVC<DPEntityBodyC> & obj)

BinIStreamC & operator >>(BinIStreamC & strm,RCHandleVC<DPEntityBodyC> & obj)

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

const RCHandleC<DPEntityBodyC> & operator =(const RCHandleC<DPEntityBodyC> & oth)

Assign handle.

RCHandleC<DPEntityBodyC> DeepCopy(UIntT levels = ((UIntT))) const

Do a deep copy of the object.

bool operator ==(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to the same object ?

bool operator !=(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to different objects ?

UIntT Hash() const

Default hash function.
This hashes on the address of the body.

bool IsValid() const

Test if this is a valid handle.

void Invalidate()

Invalidate this handle.
Unattaches the body from the handle.

bool IsHandleType(const DT &) const

Is handle of given type ?

void CheckHandleType(const DT & dummy) const

Check handle type. Throw an expception if not.

DPEntityBodyC & Body()

Access body of object.

const DPEntityBodyC & Body() const

Constant access to body of object.

UIntT References() const

Find the number of references to the body of this object.

ostream & operator <<(ostream & strm,const RCHandleC<DPEntityBodyC> & obj)

istream & operator >>(istream & strm,RCHandleC<DPEntityBodyC> & obj)