PUBLIC

DPIOTapC::DPIOTapC(const DPIOPortC &,const DPOPortC> &) DPIOTapC::DPIOTapC(void) DPIOTapC::DPIOTapC(istream &) DPIOTapC::Body(void) DPIOTapC::Body(void) const DPIOTapC::Tap(void) DPIOTapC::Target(void) DPIOTapC::IOPort(void) DPIOPortC::Copy(void) const DPIOPortC::In(void) DPIOPortC::Out(void) DPIOPortC::Body(void) DPIOPortC::Body(void) const DPIPortC::Body(void) DPIPortC::Body(void) const DPIPortC::Get(void) DPIPortC::Get(DataT &) DPIPortC::GetArray(SArray1dC &) DPOPortC::Body(void) DPOPortC::Body(void) const DPOPortC::Put(const DataT &) DPOPortC::PutArray(const SArray1dC &) DPOPortC::IsPutReady(void) const DPStreamOpC::Body(void) DPStreamOpC::Body(void) const DPStreamOpC::OpName(void) const DPStreamOpC::IPlugs(void) const DPStreamOpC::OPlugs(void) const DPStreamOpC::IPorts(void) const DPStreamOpC::OPorts(void) const DPIPortBaseC::Body(void) DPIPortBaseC::Body(void) const DPIPortBaseC::InputType(void) const DPIPortBaseC::IsGetReady(void) const DPIPortBaseC::IsGetEOS(void) const DPIPortBaseC::Discard(void) DPOPortBaseC::Body(void) DPOPortBaseC::Body(void) const DPOPortBaseC::PutEOS(void) DPOPortBaseC::OutputType(void) const DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const DPPortC::Body(void) DPPortC::Body(void) const DPPortC::IsAsync(void) const DPPortC::ConnectedTo(void) const DPPortC::GetAttr(const StringC &,StringC &) DPPortC::GetAttr(const StringC &) DPPortC::SetAttr(const StringC &,const StringC &) DPPortC::Body(void) DPPortC::Body(void) const DPPortC::IsAsync(void) const DPPortC::ConnectedTo(void) const DPPortC::GetAttr(const StringC &,StringC &) DPPortC::GetAttr(const StringC &) DPPortC::SetAttr(const StringC &,const StringC &) RCHandleVC::Body(void) const RCHandleVC::Body(void) RCHandleVC::Save(ostream &) const RCHandleVC::Save(BinOStreamC &) const RCHandleVC::Abstract(void) RCHandleVC::operator >>(istream &,RCHandleVC &) RCHandleVC::operator >>(BinIStreamC &,RCHandleVC &) DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const RCHandleC::operator =(const RCHandleC &) RCHandleC::DeepCopy(UIntT) const RCHandleC::operator ==(const RCHandleC &) const RCHandleC::operator !=(const RCHandleC &) const RCHandleC::Hash(void) const RCHandleC::IsValid(void) const RCHandleC::Invalidate(void) RCHandleC::IsHandleType(const DT &) const RCHandleC::CheckHandleType(const DT &) const RCHandleC::Body(void) RCHandleC::Body(void) const RCHandleC::References(void) const RCHandleC::operator <<(ostream &,const RCHandleC &) RCHandleC::operator >>(istream &,RCHandleC &)

public DPIOPortC<InT,OutT>

DPIOTapC(const DPIOPortC<InT,OutT> & ntarget,const DPOPortC<Tuple2C<OutT,InT>> & ntap)

Constructor.
= DPOPortC > ()

DPIOTapC()

Default Constructor.

DPIOTapC(istream & in)

Stream constructor.

DPIOTapBodyC<InT,OutT> & Body()

const DPIOTapBodyC<InT,OutT> & Body() const

DPOPortC<Tuple2C<OutT,InT>> & Tap()

Access to tap.

DPIOPortC<InT,OutT> & Target()

Access the object being tapped.

DPIOPortC<InT,OutT> & IOPort()

Simlified cast.

DPIOPortC<InT,OutT> Copy() const

Make a copy of this process.

DPIPortC<InT> & In()

Use as input port.
(Get from.)

DPOPortC<OutT> & Out()

Use as output port.
(Put to.)

DPIOPortBodyC<InT,OutT> & Body()

Access body.

const DPIOPortBodyC<InT,OutT> & Body() const

Access body.

DPIPortBodyC<InT> & Body()

Access body.

const DPIPortBodyC<InT> & Body() const

Access body.

InT Get()

Get next piece of data.

bool Get(InT & buff)

Try and get next piece of data.
If none, return false. else put data into buff.

IntT GetArray(SArray1dC<InT> & data)

Get an array of data from stream.
returns the number of elements processed.

DPOPortBodyC<OutT> & Body()

Access body.

const DPOPortBodyC<OutT> & Body() const

Access body.

bool Put(const OutT & dat)

Put data to stream
Returns true if data is put into stream succesfully.

IntT PutArray(const SArray1dC<OutT> & data)

Put an array of data elements into a stream.
returns the number of elements processed from the array.

bool IsPutReady() const

Is port ready for data ?

DPStreamOpBodyC & Body()

Access body.

const DPStreamOpBodyC & Body() const

Access body.

StringC OpName() const

Op type name.

DListC<DPIPlugBaseC> IPlugs() const

Input plugs.

DListC<DPOPlugBaseC> OPlugs() const

Output plugs

DListC<DPIPortBaseC> IPorts() const

Input ports.

DListC<DPOPortBaseC> OPorts() const

Output ports

DPIPortBaseBodyC & Body()

Access body.

const DPIPortBaseBodyC & Body() const

Access body.

const type_info & InputType() const

Get type of input port.

bool IsGetReady() const

Is valid data.

bool IsGetEOS() const

Is valid data.

bool Discard()

Discard the next input datum.
returns true on success.

DPOPortBaseBodyC & Body()

Access body.

const DPOPortBaseBodyC & Body() const

Access body.

void PutEOS()

Put End Of Stream marker.

const type_info & OutputType() const

Get type of output port.

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

DPPortBodyC & Body()

Access body.

const DPPortBodyC & Body() const

Access body.

bool IsAsync() const

Does port work asynchronously ??

DPPortC ConnectedTo() const

Is this port connected to another ?
If not returns invalid handle.

bool GetAttr(const StringC & attrName,StringC & attrValue)

Get a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

StringC GetAttr(const StringC & attrName)

Get a stream attribute.
Return the value of an attribute or an empty string if its unkown. This is for handling stream attributes such as frame rate, and compression ratios.

bool SetAttr(const StringC & attrName,const StringC & attrValue)

Set a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

DPPortBodyC & Body()

Access body.

const DPPortBodyC & Body() const

Access body.

bool IsAsync() const

Does port work asynchronously ??

DPPortC ConnectedTo() const

Is this port connected to another ?
If not returns invalid handle.

bool GetAttr(const StringC & attrName,StringC & attrValue)

Get a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

StringC GetAttr(const StringC & attrName)

Get a stream attribute.
Return the value of an attribute or an empty string if its unkown. This is for handling stream attributes such as frame rate, and compression ratios.

bool SetAttr(const StringC & attrName,const StringC & attrValue)

Set a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

const DPEntityBodyC & Body() const

Constant access to body of object.

DPEntityBodyC & Body()

Constant access to body of object.

bool Save(ostream & out) const

Save to stream 'out'.

bool Save(BinOStreamC & out) const

Save to binary stream 'out'.

RCAbstractC Abstract()

Create an abstract handle.

istream & operator >>(istream & strm,RCHandleVC<DPEntityBodyC> & obj)

BinIStreamC & operator >>(BinIStreamC & strm,RCHandleVC<DPEntityBodyC> & obj)

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

const RCHandleC<DPEntityBodyC> & operator =(const RCHandleC<DPEntityBodyC> & oth)

Assign handle.

RCHandleC<DPEntityBodyC> DeepCopy(UIntT levels = ((UIntT))) const

Do a deep copy of the object.

bool operator ==(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to the same object ?

bool operator !=(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to different objects ?

UIntT Hash() const

Default hash function.
This hashes on the address of the body.

bool IsValid() const

Test if this is a valid handle.

void Invalidate()

Invalidate this handle.
Unattaches the body from the handle.

bool IsHandleType(const DT &) const

Is handle of given type ?

void CheckHandleType(const DT & dummy) const

Check handle type. Throw an expception if not.

DPEntityBodyC & Body()

Access body of object.

const DPEntityBodyC & Body() const

Constant access to body of object.

UIntT References() const

Find the number of references to the body of this object.

ostream & operator <<(ostream & strm,const RCHandleC<DPEntityBodyC> & obj)

istream & operator >>(istream & strm,RCHandleC<DPEntityBodyC> & obj)