PUBLIC

DPIMultiVidC::DPIMultiVidC(const DListC &) DPIMultiVidC::DPIMultiVidC(const StringC &,const StringC &) DPISPortC::operator =(const DPISPortC &) DPIPortC::Get(void) DPIPortC::Get(DataT &) DPIPortC::GetArray(SArray1dC &) DPSeekCtrlC::Seek(UIntT) DPSeekCtrlC::DSeek(IntT) DPSeekCtrlC::Tell(void) const DPSeekCtrlC::Size(void) const DPSeekCtrlC::Start(void) const DPIPortBaseC::InputType(void) const DPIPortBaseC::IsGetReady(void) const DPIPortBaseC::IsGetEOS(void) const DPIPortBaseC::Discard(void) DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const DPPortC::IsAsync(void) const DPPortC::ConnectedTo(void) const DPPortC::GetAttr(const StringC &,StringC &) DPPortC::GetAttr(const StringC &) DPPortC::SetAttr(const StringC &,const StringC &) RCHandleVC::Save(ostream &) const RCHandleVC::Save(BinOStreamC &) const RCHandleVC::Abstract(void) RCHandleVC::operator >>(istream &,RCHandleVC &) RCHandleVC::operator >>(BinIStreamC &,RCHandleVC &) DPEntityC::operator =(const DPEntityC &) DPEntityC::Body(void) DPEntityC::Body(void) const RCHandleC::operator =(const RCHandleC &) RCHandleC::DeepCopy(UIntT) const RCHandleC::operator ==(const RCHandleC &) const RCHandleC::operator !=(const RCHandleC &) const RCHandleC::Hash(void) const RCHandleC::IsValid(void) const RCHandleC::Invalidate(void) RCHandleC::IsHandleType(const DT &) const RCHandleC::CheckHandleType(const DT &) const RCHandleC::References(void) const RCHandleC::operator <<(ostream &,const RCHandleC &) RCHandleC::operator >>(istream &,RCHandleC &)

Can open an arbitary list of video files/sequences, or sequences of the form basename.C.FFFFF.type
Where:
basename is a text id for the file
C is a 1 digit view number
FFFFF is a 5 digit frame number
type is the file type, such as "tif", "ppm", etc

To open a file sequence named in this way use:

DPISPortC< SArray1dC< ImageC > > port;
OpenISequence(port, "@multiview:basename:type");

Sequences are expected to start from frame 0, view 0 If no type is specified, tif is assumed
To open a predefined list, use:

DPISPortC< SArray1dC< ImageC > > port;
OpenISequence(port, "@viewlist:seq1;seq2;...;seqN");

public DPISPortC<SArray1dC<ImageC<PixelC>>>

DPIMultiVidC(const DListC<StringC> & view_list)

construct from list of sequences/files, one per view

DPIMultiVidC(const StringC & fnBase,const StringC & fnFormat)

construct from base filename and format

const DPISPortC<SArray1dC<ImageC<PixelC>>> & operator =(const DPISPortC<SArray1dC<ImageC<PixelC>>> & obj)

Assigment.

SArray1dC<ImageC<PixelC>> Get()

Get next piece of data.

bool Get(SArray1dC<ImageC<PixelC>> & buff)

Try and get next piece of data.
If none, return false. else put data into buff.

IntT GetArray(SArray1dC<SArray1dC<ImageC<PixelC>>> & data)

Get an array of data from stream.
returns the number of elements processed.

bool Seek(UIntT off)

Seek to location in stream.
Returns false, if seek failed. (Maybe because its not implemented.) if an error occurered (Seek returned False) then stream position will not be changed.

bool DSeek(IntT off)

Delta Seek, goto location relative to the current one.
The default behavour of this functions is : Do some error checking then: Seek((UIntT)((IntT) Tell() + off)); if an error occurered (DSeek returned False) then stream position will not be changed.

UIntT Tell() const

Find current location in stream.
Defined as the index of the next object to be written or read. May return ((UIntT) (-1)) if not implemented.

UIntT Size() const

Find the total size of the stream. (assuming it starts from 0)
May return ((UIntT) (-1)) if not implemented.

UIntT Start() const

Find the offset where the stream begins, normally zero.
Defaults to 0

const type_info & InputType() const

Get type of input port.

bool IsGetReady() const

Is valid data.

bool IsGetEOS() const

Is valid data.

bool Discard()

Discard the next input datum.
returns true on success.

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

bool IsAsync() const

Does port work asynchronously ??

DPPortC ConnectedTo() const

Is this port connected to another ?
If not returns invalid handle.

bool GetAttr(const StringC & attrName,StringC & attrValue)

Get a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

StringC GetAttr(const StringC & attrName)

Get a stream attribute.
Return the value of an attribute or an empty string if its unkown. This is for handling stream attributes such as frame rate, and compression ratios.

bool SetAttr(const StringC & attrName,const StringC & attrValue)

Set a stream attribute.
Returns false if the attribute name is unknown. This is for handling stream attributes such as frame rate, and compression ratios.

bool Save(ostream & out) const

Save to stream 'out'.

bool Save(BinOStreamC & out) const

Save to binary stream 'out'.

RCAbstractC Abstract()

Create an abstract handle.

istream & operator >>(istream & strm,RCHandleVC<DPEntityBodyC> & obj)

BinIStreamC & operator >>(BinIStreamC & strm,RCHandleVC<DPEntityBodyC> & obj)

const DPEntityC & operator =(const DPEntityC & dat)

Assignment.

DPEntityBodyC & Body()

Access body.

const DPEntityBodyC & Body() const

Access body.

const RCHandleC<DPEntityBodyC> & operator =(const RCHandleC<DPEntityBodyC> & oth)

Assign handle.

RCHandleC<DPEntityBodyC> DeepCopy(UIntT levels = ((UIntT))) const

Do a deep copy of the object.

bool operator ==(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to the same object ?

bool operator !=(const RCHandleC<DPEntityBodyC> & oth) const

Are handles to different objects ?

UIntT Hash() const

Default hash function.
This hashes on the address of the body.

bool IsValid() const

Test if this is a valid handle.

void Invalidate()

Invalidate this handle.
Unattaches the body from the handle.

bool IsHandleType(const DT &) const

Is handle of given type ?

void CheckHandleType(const DT & dummy) const

Check handle type. Throw an expception if not.

UIntT References() const

Find the number of references to the body of this object.

ostream & operator <<(ostream & strm,const RCHandleC<DPEntityBodyC> & obj)

istream & operator >>(istream & strm,RCHandleC<DPEntityBodyC> & obj)